A Youtube video has been blocked because its use was rejected in the privacy settings. If you want to view it, please adjust the privacy settings to allow Youtube service. You have the right to revoke or change your decision at any time.
The store will not work correctly when cookies are disabled.
with Multiblock X 1", connection set DN32/32, AQUATEST hardness tester
Entry-level model in soft water technology
suitable for 1-2 residential units
very compact design
DVGW tested
Scope of delivery:
AQA Basic soft water system
Multi-way control valve
Precision flow meter for brine
Column with exchange resin
cover
Storage room for regenerating agents
Cable and power plug
Multiblock X 1"
Connection set DN 32/32
AQUATEST hardness tester
2 m rinse water hose
2 m overflow hose 18 x 24
Technical data:
Nominal connection width DN32 (G 1 1/4" AG)
Dimensions: 53 x 29 x 43/49.5 cm
Mains connection 230/50 V/hz
Nominal pressure PN 10
Operating pressure 2.5-8 bar
Water/ambient temperature 5 - 30/ 5 - 40° C
Notice
Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.
