A Youtube video has been blocked because its use was rejected in the privacy settings. If you want to view it, please adjust the privacy settings to allow Youtube service. You have the right to revoke or change your decision at any time.
The store will not work correctly when cookies are disabled.
Suitable for approximately 2-12 people or 1-5 residential units
Microprocessor control with 3
5" display
Connectivity: WLAN and LAN
Water meter for partially softened water
manual blending valve
integrated regeneration container
Brine extraction system with precision brine meter
Hygiene facility
intelligent regeneration via capacity query
Regenerant level measurement using ultrasound
AQA Watch and AQA Safe Valve
up to 10 AQA Guard Wireless Water Sensors
manual water hardness setting
Connectivity with the Water Home App
Multiblock Module X DN 32
Connection set DN 32/32
DVGW with siphon
2 m rinse water hose 6 x 8 mm
2 m overflow hose 18 x 24 mm
AQA test hardness tester
Pearl water check test strips for monitoring water quality
Mains connection 230/50-60 V/Hz
Nominal pressure PN10
Operating pressure 2-8 bar
Maximum water temperature: 30 °C
Maximum ambient temperature: 40 °C
Notice
Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.
