A Youtube video has been blocked because its use was rejected in the privacy settings. If you want to view it, please adjust the privacy settings to allow Youtube service. You have the right to revoke or change your decision at any time.
The store will not work correctly when cookies are disabled.
protects against limescale deposits with soft water and increases comfort
stagnation-free operations
the parallel mode of operation guarantees an even flow of all system parts
with DIN-DVGW-tested individual modules
for drinking water up to 30 ° C
Operating pressure 2-7 bar
Consists of a frame with attached water distributor (JCS 5 with connection block JQT) and separately adjustable softening connections to accommodate the individual modules (JCS 5 with a common bypass valve)
The exchanger tanks (PN 10) of the individual modules are filled with food-grade monospheric ion exchange resin for optimum water distribution and minimization of pressure loss and the use of regenerant
with quantity-dependent control
wear-free ceramic disc technology for lifelong programmed operating processes
Control electronics with LED display of all operating and regeneration states
as well as manual activation of the regeneration
Forced regeneration after 96 hours at the latest and system hygienization through built-in disinfection device with platinum-coated titanium electrodes
separate salt solution and storage tanks with continuous brine storage
complete with internal system piping and residual hardness blending
Notice
Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.
