- with 2 independent sensor systems
- consisting of a valve housing
- Lift valve
- 2 independent bellows displacement sensors with liquid-filled temperature sensors and an immersion sleeve
- the capillary tube is protected by flexible metal hose
- the TAS is connected to the hot water outlet of the water heater or to the inlet of the safety heat exchanger
- If the response temperature is exceeded, the lift valve is opened by the thermal travel sensor
- Cooling water is supplied from the mains network, thus preventing the maximum permissible operating temperature from being exceeded
- Operating pressure max. 10 bar
- Ambient temperature range 80 °C
- Response temperature 99 °C
- Blow-off capacity at 110 °C= 2000 bar > 2
- 4 cubic metres/hour
- Connections 2x G 3/4 internal thread
- Connection immersion tube G1/2 external thread
- Immersion tube length 146 mm
- Capillary tube length 2000 .300 or 4,000 mm
- Housing made of pressed brass
Afriso Drainage protection 42415 thermal, capillary tube length 1300 mm
Details
Notice
Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.
Shipping information: We ship electrical products exclusively to Germany, France, Poland, Belgium, Austria, Slovenia, Spain and the Netherlands.