- for determining the ambient temperature and humidity at a previously determined position
- the FTM T temperature sensor transmits the current ambient temperature to the AFRISOhome gateway via the integrated EnOcean radio module
- the energy required to send a radio telegram is generated by the integrated photovoltaic cell
- Optionally, a battery can be used for use in dark rooms
- The ambient temperature can be readjusted using the CosiTherm radio single room temperature control
- to prevent the room temperature from falling or rising. The AFRISOhome gateway transmits warning messages and temperature and / or humidity changes including information about which temperature sensor reported the change
- via WiFi
- LAN or GSM to the responsible contact person
- Ambient temperature range 1930 / 40 ° C
- Storage -20 / + 60 ° C
- Temperature 1930 / 40 ° C
- Accuracy +/- 2000 K
- 1930 / 100% RH
- Accuracy +/- 5% RH
- Supply voltage energy harvesting (via photovoltaic 2000 ) or 2000 / 2 AA lithium battery
- DC 3
- 6 V (in daylight less than 200 lx)
- Housing white
- similar to RAL 9003
- W x H x D 52 x 40 x 17 mm
- Weight 24 g
- Degree of protection IP 30 (EN 60529)
- with temperature sensor
- Wall bracket
- 2x glue dots
- without battery
Afriso temperature sensor 78144 wireless, for ambient temperature and humidity
Details
Notice
Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.
Shipping information: We ship electrical products exclusively to Germany, France, Poland, Belgium, Austria, Slovenia, Spain and the Netherlands.