Bemm plan heating PVG200062SW3SPK
- for central heating operation (additional equipment with electric heating element) with flat front
- fine side lines and side shadow light gaps as well as attached glass front (4 mm)
- Basic body without convection fins in welded design made of horizontal round tubes 35 mm and two rows of vertically arranged flat profile tubes 50 x 10 mm
- powder coated
- the sides of the front are set inwards at a 60° angle and leave a gap to the wall for shadow or light
- the sides have a concealed fold to accommodate the optionally available LED backlight
- Flat front conceals the complete valve set with centre connection DN 15 ( 2000 /2") x 50 mm
- for flow left or right and corner connection with Eurocone for compression fitting
- only the control knob of the optional thermostat is visible
- additional connection for electric heating element DN 15 ( 2000 /2") from bottom left
- Surface powder coated DIN 55900 and baked at approx. 180 °C
- additional glass pane in 4 different surface finishes
- Standard Zubehör : Valve set consisting of thermostatic valve pre-adjustable
- Lockshield valve and connecting parts
- Vent plug DN 8 ( 2000 /4") and 2000 wall bracket meets AK 3 according to VDI 6036
- with screws and dowels
- Thermal output according to DIN EN 442
- Heating medium water
- Max. permissible operating temperature 100 °C
- Max. permissible operating pressure 6 bar
