with Multiblock X 1", connection set DN32/32, AQUATEST hardness tester
Entry-level model in soft water technology
suitable for 1-2 residential units
very compact design
DVGW tested
Scope of delivery:
AQA Basic soft water system
Multi-way control valve
Precision flow meter for brine
Column with exchange resin
cover
Storage room for regenerating agents
Cable and power plug
Multiblock X 1"
Connection set DN 32/32
AQUATEST hardness tester
2 m rinse water hose
2 m overflow hose 18 x 24
Technical data:
Nominal connection width DN32 (G 1 1/4" AG)
Dimensions: 53 x 29 x 43/49.5 cm
Mains connection 230/50 V/hz
Nominal pressure PN 10
Operating pressure 2.5-8 bar
Water/ambient temperature 5 - 30/ 5 - 40° C
Notice
Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.
