Menu

Details Chevron Down

BWT industrial softener 11178
  • for use in the industrial service water sector
  • volume-dependent controlled soft water duplex system
  • with soft water short cycle regenerator
  • intelligent control electronics with control head and control unit
  • ZLT connection
  • Individual setting of the raw water hardness at the touch of a button
  • End of regeneration just before switching cycle
  • significant space savings
  • short and fast regeneration
  • optimum salt and rinse water consumption
  • regardless of the specified water pressure
  • complete system
  • 5 m flushing water hose 13 x 2 mm and AQUA Test hardness tester
  • Nominal pressure 10 bar
  • operating pressure 2
  • 5-8 bars
  • Mains connection 230/50-60 V/Hz
  • Degree of protection IP 54
  • Water temperature max. 25 °C
  • Ambient temperature 30 °C at DVGW
  • 30/40 °C for industry

Notice

Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.

Shipping information: We ship electrical products exclusively to Germany, France, Poland, Belgium, Austria, Slovenia, Spain and the Netherlands.

Product Safety Chevron Down

Manufacturer
BWT Sports & Digital Services GmbH
E-Mail
shop@bwt.com
Address
Walter-Simmer-Straße 4
5310 Mondsee
Austria

Reviews Chevron Down

Write Your Own Review
You're reviewing:BWT industrial softener 11178 type 2, DN 32, without disinfection device
** Average Wholesale Price

Legal guarantee

Harmonised EU legal guarantee notice

Minimum two-year legal guarantee protection for goods sold in the European Union.

Consumers can claim their rights under the legal guarantee of conformity, for example if goods:

  • do not match the description;
  • do not function as intended.

Sellers are liable for any lack of conformity which existed when the goods were delivered, and which becomes apparent within the legal guarantee period. Sellers in such a situation are required to offer:

  • free repair or free replacement;
  • in some cases, a price reduction or full reimbursement.

Some countries have a longer legal guarantee period. For second-hand goods, a shorter period may apply, but not less than one year.

What to do if you receive non-conforming goods:

  1. Contact the seller as soon as possible to report the issue;
  2. Provide proof of purchase, such as a receipt, invoice, or bank statement.

Sellers and producers may also offer commercial guarantees, which apply independently from the legal guarantee. For example, you may see this GARAN label representing a commercial guarantee of durability offered by the producer at no additional cost and covering the entire good.

For more information on your rights in a specific country, visit the page below or ask the seller. https://europa.eu/youreurope/guarantees