A Youtube video has been blocked because its use was rejected in the privacy settings. If you want to view it, please adjust the privacy settings to allow Youtube service. You have the right to revoke or change your decision at any time.
The store will not work correctly when cookies are disabled.
specially designed for the complete cleaning of hydraulic circuits
for continuous protection of all components
Composite plastic body
Dirt separator with technopolymer internal element
with magnet
2 inspectable sieves with stainless steel mesh (1x BLUE with mesh size 1930 mm already installed 1x GRAY with mesh size 1930 mm)
Shut-off ball valves with cap
brass body
can be used in horizontal
vertical or 45° laid pipes
IG connections
Drain cock with hose connection
max. operating pressure 3 bar
Temperature range 1930 -90°C
Notice
Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.
