Heimeier single-pipe Heimeier base 3871-02.000 gunmetal nickel-plated, with blue protection cap

Name: Heimeier single-pipe Heimeier base 3871-02.000 gunmetal nickel-plated, with blue protection cap
Brand: Heimeier
SKU: 387102000
Price: 113.70 EUR
Availability: InStock

Be the first to review this product

€113.70

instead of €130.54 **

-13% You're saving €16.84

Incl. 19% VAT , plus shipping costs

Available for order delivery time: 10-28 working days

Shipping Cost Points: 50

Part Number: 387102000

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Illustration may differ from the actual product. Delivery without accessories and decoration.

Details

Heimeier single pipe Heimeier lower part 3871-02.000

One-pipe valve made of gunmetal nickel-plated with immersion pipe for Bathroom Radiators with one-point Bathroom Radiators on the side
the center distance of the pipe connections is 58 mm
the fitting consists of a single-pipe valve base
Immersion tube (short or long version) and baffle plate
Pipe side connection G 3/4
with compression fitting for plastic
Copper-
Precision steel or composite pipe
for the single-pipe valve lower part only the associated ones
Use marked compression fittings (marking e.g. 15 THE)
The Spezial regulating Spezial ensures an almost constant mass flow in the ring main
In the design case, the radiator share is 35% of the ring mass flow
Flow and return can be shut off
whereby the Bathroom Radiators during operation without emptying the system
the bypass remains open regardless of the shut-off
so that the circulation of the ring main is not interrupted
the immersion tubes are available in 2 different lengths depending on the application
the long immersion tube (screw-in length 250 mm) is necessary when installing DIN
Tubular and narrow tube radiators with more than 10 sections should be used
otherwise the short immersion tube (screw-in length 85 mm)
the 2000 in the middle of the 2000 for both immersion 2000 . Link installed
When using plate and special radiators, a two-chamber connection with a Ø 11 mm hole must be available or the radiator connection must be attached in this way
that the long immersion tube can be inserted without a baffle plate
Distributor inserts and separating elements as well as the immersion tube length are to be installed according to the installation instructions of the respective radiator manufacturer
Problem-free dismantling of the radiator by separating the immersion tube in the screw connection
the direction of flow marked on the single-pipe valve must be observed
since the Bathroom Radiators not properly flowed through if the connection is Bathroom Radiators