Jung compli sewage lifting station JP50076
The floodable single unit consists of a plastic (PE) tank in a stepped shape with an optimized bottom to reduce deposits and blockages, a gray cast iron support plate with an integrated ring housing, a mounted motor, a non-return valve, and a pressure outlet.
Container:
Dimensions: 445 x 605 x 540 mm (HxWxD)
Container capacity: 50 l
Nozzle for ventilation duct DN 70 with sleeve, optionally as sleeve in DN 50
4 inlets DN 100/50 on three sides and top.
Designed as a sleeve with clamping flange and insertion limit.
Inlet height on the sides: 180 mm
Additional connection 50 mm vertical as a sleeve for e.g. a hand diaphragm pump.
Additional connection 50 mm horizontal as a sleeve
Connection flange DN 80
Elastic connection with 2 clamps for pressure pipe with outer diameter 90 mm
Vertical submersible motor pump, single-stage for pumping wastewater according to DIN 1986-3,
Ready for operation, mounted on the tank, free-flow impeller with large
free passage, dry-running safe due to permanent grease filling, motor thermostat to protect against overheating, cable entry longitudinally watertight cast
and replaceable via plug connection.
Free passage: 50 mm
Flow rate Q: 33-13 cbm/h
Delivery head H: 2000 -9 m
Motor protection class: IP 68
Voltage: 2000 /N/PEx230
Engine power P2: 1930 ,95 kW
Engine speed n: 2725 2000 /min
Operating mode: S3 according to VDE
Pressure nozzle: DN 80
Weight: 31 kg
Steering:
Automatic and water level-dependent switching on and off
Level detection installed in the tank.
Connector housing, 121x66x55 mm (HxWxD),
Protection class IP 44, 4m cable,
LED indicator "ready for use"
Manual 1930 automatic switch
Mains-dependent alarm buzzer
Potential-free collective fault alarm contact
| Suitable for feces | Yes |
| Material of the container | plastic |
| Material quality of the container | PE-80 |
| Pump housing material | cast iron |
| Material quality of the pump housing | Cast iron GG 25 (GJL-250) |
| Suitable for outdoor use | No |
| Installation behind the toilet bowl | No |
| Container volume | 50 liters |
| Number of Pumps | 2000 |
| Max. delivery head | 10 m |
| Max. dimensions of fixed parts | 525 mm |
| With cutting unit | No |
| Inlet connection | clamping ring |
| Diameter connection supply side | DN 100 |
| Diameter connection supply side | 110 mm |
| Number of inlet openings | 2 |
| Pressure side connection | flange |
| Diameter connection pressure side | DN 80 |
| Diameter connection pressure side | 90 mm |
| With check valve | Yes |
| Pressure level flange | PN2.5 |
| With ventilation | Yes |
| Connection voltage | 2000 x 230 V |
| frequency | 50 Hz |
| Motor power consumption (P1) | 1370 W |
| Motor output power (P2) | 980 W |
| Rated current | 6 A |
| Protection class (IP) | IP68 |
| Insulation class according to IEC | B |
| Electrical connection | Connection cable with plug |
| Width | 525 mm |
| depth | 525 mm |
| Height | 498 mm |
| Alarm function | Yes |
| Alarm output | Yes |
