A Youtube video has been blocked because its use was rejected in the privacy settings. If you want to view it, please adjust the privacy settings to allow Youtube service. You have the right to revoke or change your decision at any time.
The store will not work correctly when cookies are disabled.
made of PE for mounting two U3K type wastewater pumps
U5K
U6K
US62
US73
US102
US 103
US73 Ex or US 103 Ex
also usable as a standalone station
Then choose a pump with an integrated float switch.
1 inlet nozzle DN 150/100
1 ventilation nozzle DN 70 and 1 threaded connection 1 1/4" for the pressure line
Two check valves with elastic connectors are included.
Sealing sleeve for connection to a building-provided thin-bed waterproofing system
The cover frame is level-compensating up to 100 mm.
Plastic cover with floor drain and odor trap, optionally closed or open.
Transitions between container/cover frame and cover frame/cover plate equipped with profile seals
825 x 840 x 840 mm
Installation depth: 825-925 mm
Inlet nozzle height: 440 mm
Pressure outlet height: 565 mm
Height of ventilation duct DN 70: 565 mm
Weight: 30 kg
Volume: 240 liters
Notice
Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.
