A Youtube video has been blocked because its use was rejected in the privacy settings. If you want to view it, please adjust the privacy settings to allow Youtube service. You have the right to revoke or change your decision at any time.
The store will not work correctly when cookies are disabled.
Automatic notification of an impermissibly high water level via a loud buzzer
The alarm can be forwarded via a potential-free normally open contact (max. 5A, 250 V AC)
Battery charging circuit for mains-independent operation of the alarm device with optional battery
Operating voltage 230V
50Hz
1.5W
Ambient temperature -20 to +50 °C
Connector housing 147 x 71 x 70 mm
IP20
Immersion switch with 3m cable
Socket (max. 10/16 A, 250 V AC)
Notice
Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.
