A Youtube video has been blocked because its use was rejected in the privacy settings. If you want to view it, please adjust the privacy settings to allow Youtube service. You have the right to revoke or change your decision at any time.
The store will not work correctly when cookies are disabled.
Jung Pumpen lifting system Compli 1025/4 S1 HL JP50840
400 V
vertical single-stage pump
Free passage 70 mm
Pressure pipe DN 100
Bearings: Ball bearings, grease-lubricated
Engine housing cast iron
Pump housing cast iron
Floodable, yes
Pressure outlet DN 80
Container volume 117 l
Weight 133 kg
Voltage 3/N/PE~400 V
Motor power P1: 3 kW
Motor power P2: 2.4 kW
Current 5.1 A
Power cable 10m H07RN-F
6G1.5 wires
Protection class IP 68
Insulation class F
Winding thermostat yes
CEE-16A plug
Notice
Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.
