Salus ultra-flat room thermostat 113610
- extra-flat
- Programmable designer room thermostat for measuring and controlling room temperature
- the absolute measure of all things
- with many additional features
- Flush-mount installation with a minimal wall projection of only 10mm
- can be wired as a stand-alone 230V unit
- can be connected with a potential-free contact or a 230V signal line.
- Additionally, the room thermostat has a Wi-Fi chip and can therefore be integrated into the Smart Home system at any time.
- This requires the Universal Gateway (optional).
- when the room thermostat is integrated into the Smart Home System
- All commands can also be given wirelessly and, for example, the wireless terminal block 132801 (optional) can be controlled.
- In wireless mode, the room thermostat is completely silent and therefore ideal for living rooms and bedrooms.
- An additional CO input (potential-free) enables automatic switching between heating and cooling.
- those who heat with a heat pump
- It can often also be used for cooling and reduce the room temperature by up to 5 K.
- The cooling signal can be deactivated at the program level.
- This is frequently used in bathrooms.
- Time-temperature program with up to 6 intervals
- Programs can be the same every day
- 5 + 2 or each day can be chosen separately.
- Comfortable temperature
- Night setback temperature and any other desired temperature can be set to the exact degree.
- In addition to the program function, a party function can also be used.
- Holiday function and frost protection function can be used
- Additionally, the room humidity is measured and optionally displayed (program selection).
- besides the usual program modes
- Does it have the comfort program?
- This allows floors to be heated even without heating requirements.
- This will make cold stone or tile floors more comfortable.
- mainly during the off-season
- avoided
- The increase in comfort is enormous.
- There are 3 comfort levels.
- The program mode can be easily switched off.
- A programmable room thermostat thus becomes an easy-to-use digital room thermostat.
- An external Fühler (optional) can be connected.
- as an air sensor to determine room temperature or as a floor sensor as a safety device against excessively high floor temperatures
- Alternatively, a presence sensor can be connected.
- especially advantageous in hotel rooms
- This room thermostat is characterized by consistently precise measurement and control of the room temperature.
- the rule deviation of +/- 1930
- 25°C or +/- 1930
- 5 K remains constant throughout the entire operating period.
- Optionally, an energy-saving option can be used.
- self-learning TPI mode can be selected
- This further increases living comfort
- because overshooting or undershooting is virtually eliminated
- to prevent valves from becoming stuck
- during the summer season
- Does the thermostat have a valve protection function?
- which can be turned off
- can function as Master in a Master slave arrangement
- Control type: Heating and cooling
- Dimensions: Surface-mounted: 86 x 86 x 10 mm Flush-mounted: 75 x 75 x 17 mm
- Weight: 140 gr.
- Protection class: IP30 Max.
- Switching current: 3 A
- Color: similar to RAL9016
- Operating voltage: 230V / 50Hz
- Switching output: Relay 230V
- Radio frequency: 2
- 4 GHz
- Setting range: +5°C to +35°C Max.
- Ambient temperature: +45°C
- Cable connections: Screw terminals