electronic control with three sensors (3i technology)
Temperature adjustable via rotary control with precise temperature scale
selectable device performance
multi-stage
electronic safety concept with air bubble detection and safety temperature cut-off
suitable for preheated water from solar systems and heat pumps up to 70 °C without reheating
Scalding protection can be permanently adjusted by a qualified technician
Pre-assembled flow limiter even at low cold water temperatures in winter
the device cap and the control panel can be rotated when mounted under the table
horizontal mounting possible
can also be installed in suspended ceilings
A high-voltage connection (3~/400V) is required. Approval from the local grid operator may be required. Installation by qualified personnel only.
Notice
Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.
