TECEprofil WC module 9300300
- for attachment to TECEprofil profile tubes or for installation in metal or wooden stud walls and as a front wall or corner module
- also suitable for single-block mounting
- for WC fittings and TECE flush plates
- Completely pre-assembled unit
- consisting of TECE-UP cistern for front actuation and a plastic safety tank
- The cistern is completely pre-assembled and sealed.
- Cistern connection with 1/2" female thread. 10 l tank capacity.
- 6 l preset standard flush volume
- 4.5/7.5/9 l flush volume can be optionally adjusted at any time.
- 3 l partial flush with dual-flush technology
- Remaining volume usable for immediate cleaning rinse
- Condensation-insulated
- Depending on the actuator plate, it can be used as a single or dual flush cistern.
- tested according to DIN EN 14055
- Valve group 1 according to DIN 4109
- Low-noise hydraulic filling valve - L(ap) <= 17 dB(A) at 3 bar flow pressure
- Module consisting of a self-supporting mounting frame with a powder-coated surface
- two retaining bolts and nuts M12
- WC drain bend DN 90 with transition piece DN 90/100 made of PP
- Transition piece also suitable for horizontal installation
- WC connection set DN 90 including safety construction protection plug
- Adjusting a raised ceramic mounting for a 48 cm seat height
- possible according to DIN 18040
Description and intended use
The TECEprofil WC module, 1120 mm long, is a prefabricated mounting element for flush-mounted installation of toilets in drywall and solid walls. The module combines structural stability with standardized connection interfaces, making it suitable for use in public, commercial, and private restrooms. Designed for easy integration with ceramic toilets and common flush plates, it offers the necessary fixing and connection options for standards-compliant installation.
Technical features
The frame consists of a corrosion-protected steel profile with a width of 1120 mm, registered fixing points for toilet elements, and height-adjustable connections for inlet and outlet pipes. The module is designed to accommodate standard cisterns and flushing mechanisms and allows for factory pre-assembly of key components. The modular design enables controlled planning of pipework and insulation.
Assembly and planning instructions
During installation, ensure compliance with the structural requirements and local connection dimensions. Position the module, anchor it to the floor and wall, and adjust it to the intended height of the toilet bowl. Check the water supply and drainage connections before cladding. The toilet module is compatible with all TECE flush plates.
Compatibility and everyday usability
The TECEprofil WC module is compatible with standard ceramic toilets and can be used in both accessible and conventional installations. Its low profile and standardized connection points simplify repairs and maintenance. Made from robust materials and featuring tested fixing points, the module meets the requirements for durability and safe operation in high-traffic environments.
