TECEprofil WC module 9300309
- for mounting on TECEprofil profile tubes or as a wall or corner module
- for WC fittings and TECE flush plates
- Fully pre-assembled unit
- consisting of TECE-UP cistern for top or front actuation, plastic safety tank
- The cistern is completely pre-assembled and sealed.
- Cistern connection with 1/2" female thread
- Hydraulically optimized cistern for low installation heights
- 10 l tank capacity
- 6 l cistern according to DIN EN 14055
- Adjustable flush volume: 4.5/7.5/9 liters
- 3 l partial flush with dual-flush technology
- Remaining volume usable for immediate cleaning rinse
- Depending on the actuator plate, it can be used as a single or dual flush cistern.
- Depending on the mounting, it can be used for operation from above or from the front.
- tested according to DIN EN 14055
- Valve group 1 according to DIN 4109
- Low-noise hydraulic filling valve L(ap) <= 17 dB(A) at 3 bar flow pressure
- Module consisting of a self-supporting mounting frame with a powder-coated surface
- two retaining bolts and nuts M12
- WC drain bend DN 90 with transition piece DN 90/100 made of PP
- Transition piece also suitable for horizontal installation
- WC connection set DN 90 including construction protection plug
- 2 depth-adjustable module fixings
Overview and purpose
The TECEprofil WC module is a frame-integrated system for the secure installation of wall-hung toilets in conventional and accessible bathrooms. With a height of 1120 mm and an integrated cistern, the module provides a robust basic structure for sanitary fittings in public buildings, care facilities, and private bathrooms. It is suitable for designs based on accessible solutions and geriatric concepts.
Function and technical features
The integrated cistern is designed for standard connection and access routes; the front/top actuation allows for flexible operating concepts in various installation situations. The frame's static design withstands loads that may occur when used by people with reduced mobility. The construction supports the installation of grab bars and the attachment of common seating and restraint systems.
Planning and assembly
Installation can be carried out using dry or wet construction methods. Pre-prepared mounting surfaces and connection points reduce labor and improve planning on the construction site. Compatible pipe clamps and seals simplify connection to existing drainage and supply lines. When installing in accessible restroom environments, the recommended mounting heights and the requirements of the relevant standards must be observed.
Compatibility and accessories
The module is compatible with standard toilet bowls and various flush plates. System accessories allow for the integration of support solutions, embedding the module in a fully barrier-free design. The construction takes into account the requirements of care and geriatric concepts and allows for modifications without alterations to load-bearing components.
Comfort and everyday usability
The front-mounted operation and mounting options for support systems improve usability in everyday situations. Its compact design reduces visible installations while maintaining excellent accessibility for maintenance. Applications range from private, accessible bathrooms to institutional restrooms.
