A Youtube video has been blocked because its use was rejected in the privacy settings. If you want to view it, please adjust the privacy settings to allow Youtube service. You have the right to revoke or change your decision at any time.
The store will not work correctly when cookies are disabled.
Modulating compressor with inverter technology always adjusts the performance to the current building heating load
Active cooling function integrated as standard
intelligent use of self-generated energy (PVready)
pre-filled with refrigerant up to 15 m line length
up to 7 devices can be cascaded
SoundSafeSystem
sensor-controlled refrigeration circuit
Integrated active cooling operation (for this, the heating system must be prepared on site and a coding resistor must be used)
integrated 190L hot water coil storage tank
Electronics - additional heating up to 8.5 kW/400 V
Priority switching valve hot water filling device
15 l expansion tank for Bathroom Heating
DIA system with plain text display beleuchtet
Condensate pan heater and funnel
A high-voltage connection (3~/400V) is required. Approval from the local grid operator may be required. Installation by qualified personnel only.
? ATTENTION: May not be exported to Switzerland!
Notice
Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.
