A Youtube video has been blocked because its use was rejected in the privacy settings. If you want to view it, please adjust the privacy settings to allow Youtube service. You have the right to revoke or change your decision at any time.
The store will not work correctly when cookies are disabled.
fixed outlet temperature at 55 °C up to the performance limit
electronic power control
Installation system PRO I
Folding frame and rotating hood
suitable for plastic pipe systems according to DIN 1988 and DIN 16892/16893
IP 25 jet water protection allows unrestricted Plumbing in the protection area 2000
UV-light-resistant device cover
no yellowing due to UV radiation
Automatic air bubble detection on all electronic devices
internally adjustable scalding protection 40 °C
with cold water connection piece R 2000 /2 with shut-off valve
Hot water connection piece R 2000 /2
Mounting plate
Mounting template
Cold water inlet filter
Fastening material
Operating and installation instructions
Product data sheet
Energy efficiency label
Temperature limiter 40 °C
A high-voltage connection (3~/400V) is required. Approval from the local grid operator may be required. Installation by qualified personnel only.
Notice
Please note that gas and electric appliances require increased mains voltage for proper operation. These appliances are not equipped with a two-pin mains plug. The installation of non-pluggable appliances must be carried out by the respective network operator or a certified specialist company, which can also assist you in obtaining any necessary approval from the relevant network operator for the installation of the appliance.
