Wilo Standard drinking water Wilo TOP-Z 2048341 30/7 RG, PN 10, 3 x 400 V, flange connection

Wilo standard pump TOP-Z 30/7 3ph RG PN 10 Rp11 / 4 1930 , 09kW Wilo wet Wilo standard pump TOP-Z 30/7 3ph RG PN 10 Rp11 / 4 1930 , 09kW drinking water circulation Wilo match2 -TOP -Z speed-switchable Wet-runner circulation pump for pipe installation. Thermal insulation shells as standard. 3 speed levels adjustable. For mains connection 1 ph 230 V, 50 Hz (up to P2 = 180 W) or 3 ph 400 V, 50 Hz. Pompes with 1ph motor Blocking current resistant up to P2 = 90 W bzw.P2 = 180 W with full motor protection by winding protection contacts (WSK) in conjunction with Wilo device SK 602 / SK 622. Pompes with 3 ph motor up to P2 = 90 W: Blocking Pompes , electronic direction Pompes with Pompes . Pompes with 3 ph motor from P2 = 180 W with integrated motor protection including trip electronics. Electronic direction indicator light combined with signal lamp. Gray cast iron or gunmetal body (TOP-Z-30/7 as standard), impeller made of glass fiber reinforced plastic, chrome steel shaft with carbon plain bearings. Mechanical seal between pump and motor. 1930 medium: water flow rate: 1930 , 00 m3 / h delivery head: 1930 , 00 m operating temperature: 20 oC max. Operating temperature - drinking water up to 20 odH: max. +80 o C, short (2h) 110 oC - Heating water: - 10 to + 110 oC (With Protect module: Tmin = -20 oC) Operating / Nominal pressure: / PN10 Type of current: / 50Hz Power requirement P1 (max.): KW Speed ​​(max.) : 1 / min Type of protection: IP Pipe connection: DN Wilo : Wilo Type: Wilo -TOP-Z